Sonifex RB-SM2 Dual Stereo to Mono Converter
Availability:In stock
Cat No.
6032
SKU
RB-SM2
Product Information
Sonifex RB-SM2 Dual Stereo to Mono Converter
The Sonifex RB-SM2 consists of two independent converters which will produce two fully buffered and balanced mono line outputs from two stereo inputs.
All connections are on the rear panel of the unit. The XLR-3 inputs are electronically balanced with an impedance of 20kohm bridging.
These can be wired unbalanced to accept an output from domestic equipment.
The XLR-3 line outputs are electronically balanced with an output impedance of Output gain adjustment using pre-set potentiometers for both converters allows a normalised mono output from domestic stereo equipment.
The potentiometers are accessible through the rear panel.
- Compact unit
- Rack Mountable
- 4 x XLR Inputs
- 2 x XLR Outputs
| Maximum Input Level | +28dBu |
|---|---|
| Maximum Output Level | +28dBu |
| Frequency Response | 20Hz to 20kHz +/- 0.1dB (600 ohm load, ref 1kHz) |
| Gain Range Adjustable | 8dB loss to 18dB gain, ref. 0dBu in on L and R |
| Common Mode Rejection | >66dB typically |
| Distortion | THD @ 1kHz +8dBu 0.01% |
| Noise | -100dB unity gain ref +8dBu |
| Input Impedance | >20kohm balanced bridging |
| Inputs | 4 x XLR 3 pin female (balanced, can be unbalanced) |
| Outputs | 2 x XLR 3 pin male (balanced, can be unbalanced) |
| Mains Input Filtered IEC | switchable 110-120V, or 220-240V, fused, 6W max |
| Net Weight | 1.05kg |
| Gross Weight | 1.5kg |
| Dimensions (Raw) | 28cm (W) x 10.8cm (D) x 4.2cm (H) |
| Dimensions (Boxed) | 36cm (W) x 20.5cm (D) x 6cm (H) |