Product Information
DM-E100 Stereo Microphone
Take your movies to a brand-new level with thanks to a small and practical microphone offering stereo sound and noise.
Small Microphone - Big Sound
Add crystal clear stereo sound to your movies using this high-quality lightweight microphone that plugs direct into your compatible Canon camera.*
*Check your camera for compatibility. Camera and lens sold separately.
Capture Crystal Clear Sound with Reduced Noise
Thanks to an electret condenser design boasting 120º unidirectional stereo sound down to -40dB sensitivity, great quality audio is easy to achieve.
Easy to Use with a Plug and Play Design
With power coming directly from the 3.5mm audio jack, the microphone does not require a battery and is always ready the moment the camera is turned on.
Lightweight, Pocket-Sized Design
Weighing just 64g and no bigger than the palm of your hand, the microphone barely adds any extra weight to your camera and slips easily into a pocket or camera bag.
Worry-Free Sound Recording
The microphone is designed to offer you the easiest route to high quality recording with a secure hot shoe mount that secures the microphone to the camera.
Works with Compatible Canon Cameras
The microphone works with the EOS 200D, 250D, 800D, 77D, 80D, 90D, M50 and M6 Mark II as well as PowerShot G7 X Mark III. Please check your camera is compatible.
Key Features:
- Electret stereo condenser design
- Powered by camera
- Hot Shoe mount with foot lock ring
- Wind shield
- 100Hz to 10kHz sound frequency range
- 120 degree unidirectional stereo
- Compact and lightweight
- 3.5mm audio jack connection
- Electret stereo condenser design
- Powered by camera
- Hot Shoe mount with foot lock ring
- Canon Stereo Microphone DM-E100
- Windshield for Stereo Microphone DM-E100
- Instruction Manual
- Warranty Card
| Microphone Type | Electret condenser type stereo microphone |
|---|---|
| Directional Sound Pick-Up | Unidirectional 120° (Stereo) |
| Sensitivity | -40 dB ±4 dB (1 kHz, 0 d B=1 V/Pa) |
| Frequency Range | 100 - 10000 Hz |
| Output Impedence | 2 kΩ (kilo Ohms) or less |
| Signal-to Noise Ratio | 66 dB or higher |
| Battery | None |
| Power Source | Plug-in power (powered by the camera1) Power source voltage range: 1.2–5 V |
| Cord Length | Approx. 260 ±30 mm |
| Connecting Terminal | Stereo mini plug (diameter 3.5 mm) |
| Attached Method | Hot Shoe mount with foot lock ring |
| Wind Screen | Included |
| Working Temperature | 0 – +40°C (32 – 104°F) |
| Working Humidity | 0 – 85% |
| Dimensions (W x H x D) | Approx. 30.5 (W) x 66.5 (H) x 88.2 (D) mm 2 |
| Weight | Approx. 64 g 2 |
| Compatibility |
|
All the data above is based on Canon’s testing standards.
The product specifications and exterior are subject to change without notice.
- Compatible cameras: EOS 200D, EOS 250D, EOS 800D, EOS 77D, EOS 80D, EOS 90D, EOS M50, EOS M6 Mark II, PowerShot G7 X Mark III (As of 24/10/2019)
- Excluding cord