Kramer 1:2 High Resolution UXGA Distribution Amplifier
Availability:In stock
Cat No.
36928
SKU
VP-200K
Product Information
Kramer 1:2 High Resolution UXGA Distribution Amplifier
The VP−200K is a distribution amplifier for computer graphics signals up to and exceeding UXGA. The unit takes one input, provides correct buffering and isolation, and distributes the signal to two identical outputs.
- High Bandwidth — 400MHz (–3dB).
- HDTV Compatible.
- ID Bit Control.
- Kr–isp® Advanced Sync Processing — Ensures compatibility with a wide range of computers (even if the sync level is too low) by restoring the sync signal waveform. Kr–isp® advanced sync processing can be enabled or disabled.
- EDID PassThru — Passes EDID signal from display to source via output 1.
- Selectable Sync Input Impedance — 75Ω (video), 510Ω (Graphics/TTL).
- DC Coupling.
- 3ft 15–pin HD Cable Included.
- Used for Computer Graphic Signals
- Resolution up to or Higher than UXGA
- Ideal for Dual Monitor / POS Systems
- Compatible with HDTV Component Signals
| Input | 1 UXGA on an 15–pin HD connector |
|---|---|
| Outputs | 2 UXGA on 15–pin HD connectors |
| Maximum Output Level | 2.2Vpp |
| Bandwidth (-3db) | 400MHz |
| Diff. Gain | 0.03% |
| Diff. Phase | 0.03Deg |
| K-Factor | <0.05% |
| S/N Ratio | 72dB @5MHz |
| Controls | ID BIT switch analog/TTL switches for setting the sync |
| Coupling | DC |
| Power Consumption | 5V DC, 130mA |
| Included Accessories | Power supply (5V/2.6A), mounting bracket |
| Product Dimension | US: 6.98cm x 4.70cm x 11.43cm (2.75" x 1.85" x 4.50" ) W, D, H EU, UK: 8.00cm x 4.70cm x 8.00cm (3.15" x 1.85" x 3.15" ) W, D, H |
| Product Weight | US: 0.1kg (0.2lbs) approx. EU, UK: 0.1kg (0.2lbs) approx. |
| Shipping Dimensions | US: 11.50cm x 4.70cm x 7.00cm (4.53" x 1.85" x 2.76" ) W, D, H EU, UK: 23.20cm x 13.60cm x 10.00cm (9.13" x 5.35" x 3.94" ) W, D, H |
| Shipping Weight | US: 0.4kg (0.8lbs) approx. EU, UK: 0.4kg (0.8lbs) approx. |