Hedbox RP-DC50-DFZ100 Including 2x Sony plate

Hedbox RP-DC50-DFZ100 Including 2x Sony plate

The RP-DC50 Digital Dual Professional Battery Charger Conveniently Charges Two Professional Batteries Pack that run on 7.2V and 14.4V.

Simultaneously, drawing power from either an AC wall source (an AC cord is included) or a 12/24V DC power source (a DC car charger need to be order separately). Additionally, the Dual Professional Battery Charger Features a USB Power Output to Charge other Devices with a USB Power Input, with powerful 2.1A Output. With protection against Overcharging, Overheating, and Short Circuit, the Duo Charger safely, conveniently, and quickly recharges up to two Professional Li-ion Batteries.

Charging Technology

Intelligent charging systems integrate the control systems within the charger and the electronics within the battery to allow precision control over the charging process. As a safety precaution with high-capacity batteries, a pre-charging stage is used.

The charging cycle is initiated with a low current. If there is no corresponding rise in the battery voltage, it indicates that there is possibly a short circuit in the battery (zero volt activation). Constant current/constant voltage (CC/CV) charging mode is an effective way to charge lithium batteries.

When a lithium battery is nearly empty, we take constant current to charge it. Charger CPU automatically adjusts charging current to be lower than the max charging current that the battery can accept. With constant charging, the voltage of the battery rises slowly until it reaches a maximum voltage at which point the charger switches the charging method to “constant voltage” and reduces the charging current. When the battery is fully charged, this state is stopped.