Sonifex RB-SM1 Stereo to Mono Converter
Availability:In stock
Cat No.
6031
SKU
RB-SM1
Product Information
Sonifex RB-SM1 Stereo to Mono Converter
The RB-SM1 consists of a converter which will produce a fully buffered and balanced mono line output from a single stereo input.
All connections are on the rear panel of the unit. The XLR-3 input is electronically balanced with an impedance of 20kohm bridging.
It can be wired unbalanced to accept an output from domestic equipment.
The XLR-3 line output is electronically balanced with an output impedance of Output gain adjustment using pre-set potentiometers allows a normalised mono output from domestic stereo equipment.
The potentiometers are accessible through the rear panel.
The Sonifex Redbox SM1 can be rackmounted for studio use or to be fitted to an OB truck.
- Produces a balanced mono line output
- Compact & Lightweight Unit
- Rack mountable
| Maximum Input Level | +28dBu |
|---|---|
| Maximum Output Level | +28dBu |
| Frequency Response | 20Hz to 20kHz +/- 0.1dB (600 ohm load, ref 1kHz) |
| Gain Range Adjustable | -8dB to +18dB gain, ref. 0dBu in on L and R |
| Common Mode Rejection | >66dB typically |
| Distortion THD | 1kHz +8dBu 0.01% |
| Noise | -100dB unity gain ref +8dBu |
| Input Impedance | >20kohm balanced bridging |
| Inputs | 2 x XLR 3 pin female (balanced, can be unbalanced) |
| Outputs | 1 x XLR 3 pin male (balanced, can be unbalanced) |
| Mains Input | Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max |
| Net Weight | 1.0kg |
| Gross Weight | 1.45kg |
| Dimensions (Raw) | 28cm (W) x 10.8cm (D) x 4.2cm (H) (1U) |
| Dimensions (Boxed) | 36cm (W) x 20.5cm (D) x 6cm (H) |