TVLogic LUM-313G 31" True 4K Monitor with 12G-SDI & HDMI 2.0

TVLogic LUM-313G 31" True 4K Monitor with 12G-SDI & HDMI 2.0

The LUM-313G is a 31.1" native 4K resolution(4096×2160) monitor with maximum luminance of 350 nit, contrast ratio of 1500:1, wide colour gamut and wide viewing angle.

Equipped with 4 BNCs (2×12G-SDI + 2×3G-SDI) and HDMI 2.0 interface, it supports various video formats up to 4K/60p through single-link 12G-SDI, Quad 3G-SDI and HDMI 2.0.

In addition to various professional features such as Waveform monitor and Vectorscope, the LUM-313G provides HDR emulation function with HDR EOTFs of PQ, HLG and SLog3.

More camera-specific HDR logs and gamuts will be supported by firmware update.

Key Features

• Audio Level Meter Display:Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI.
• Blue Only/ Mono:Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the colour tones (tones and saturation) of the screen using the SMPTE Colour Bar. For example, after displaying the Blue channel, adjust the Colour (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness.
• H/V Delay:Allows you to check the Blanking area and synchronise signals by displaying the horizontal and vertical intervals in the centre of the screen.
• Marker:Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line colour and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements.
• Time Code Display:Displays the Time-code information on the screen.
• User Aspect:Adjusts the Width /Height display ratio.
• Various Scan Modes:Controls the size of the image.
• Overscan:Extra area around the four edges of the image that may not be seen reliably by the viewer.
• Underscan:Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio.
• Waveform Y:Displays the Luma(Y’), Cb, Cr component of the input signal into waveform.
• Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis.

• Blue Only/ Mono
• H/V Delay
• Marker
• Time Code Display
• User Aspect
• Various Scan Modes